55
Press the Power button to set the
brightness you require.
1
Push sets all
4 lights on at full brightness.
2
Pushes
sets all 4 lights to medium brightness.
3
Pushes sets all 4 lights to low brightness.
4
Pushes sets outer lights to medium and
inner 2 lights to off.
5
Pushes sets outer
lights to low and inner 2 lights to off.
Hold Power button to turn unit off.
Attach the straight section of the Power
Cable to the Breathing Tube with Cable/
Hose Clips so that the Connector is
positioned to connect to the connector
on the back of the L4 Light unit and the
coiled section is hanging off the bottom
of the breathing tube.
Thread on the Breathing Tube to the
Helmet and then connect the cables
together at the back of the helmet.
Connect the other end of the power
cable to the Belt Mounted Battery Pack.
Put on the Respirator according to the
respective User Instruction Manual for
the Respirator being used (i.e. Nova3).
Fit the Belt Mounted Battery Pack to
your waist.
Summary of Contents for RPB L4 Light
Page 1: ...INSTRUCTION MANUAL...
