Oven Door Removal
The SODIR Models FC-60, FC-60/1, FC-60 G and FC-60 G/1 are equipped with a double glass
door which is easily removable for cleaning. For cleaning, remove the door following the steps
below:
• Open the door completely
• Move each hinge lock to “UP” position, engaging the “J” hook of the long arm (one lock per
hinge)
• Tilt the door up at 45 – 60 degree angle (hinge lever arm will be released)
• Pull the door out of the hinge slots
Upon removal, the door can be washed or cleaned, both on the inside and on the outside. To
install the door, reverse the procedure. Insure that the bottom of the hinge cutout fits into the
notch on the bottom of the hinge. Move the hinge lock to the “down” position to restore
proper hinge operation. DO NOT leave the hinge lock in “UP” position at the end of
installation.
Maintenance
You should inspect all parts on a regular basis to ensure that all is in proper working order. If a
part is damaged, have the unit repaired by an authorized service agency prior to returning the
unit to operation. If you have trouble locating a service agency in your area, please consult our
website at
http://www.equipex.com/
, or call us at 1-800-649-7885 and ask for customer service.
