manualshive.com logo in svg

Equipter RB4000, Operator'S Manual

The Equipter RB4000 Operator's Manual is a comprehensive guide designed to assist users in operating their RB4000 model efficiently and safely. This invaluable manual is available for download, free of charge, exclusively from our website. Equip yourself with essential instructions and tips to optimize the performance of your RB4000.

Share
Download
background image

GVWR

 ................................................................................................................................................................................ 7500 lbs.

Empty Weight

 .............................................................................................................................................................. 4140 lbs.

Tongue Weight (approximate)

 ................................................................................................................................. 660 lbs.

Overall Transport Width

 ..................................................................................................................................................6 feet

Overall Length

 ..................................................................................................................................................................13 feet

Width with Lids Open

 .......................................................................................................................................... 10-1/2 feet

Extension Back (from rear axle centerline)

................................................................................................. 6-1/2 feet

Dump Height (from pivot pin)

 ...................................................................................................................................11 feet

Dump Box Capacity (lift, dump and rollback)

 .............................................................................................. 4000 lbs.

Dump Box Capacity (towing)

 ...............................................................................................................................3540 lbs.*

Maximum Travel Speed

 .............................................................................................................................55 mph (88 kph)

Engine Power

 ...................................................................................................................................................................... 13 hp.

Hydraulic Pump Rating

Hydrostat

 ..................................................................................................................... 18 gpm 3000 psi (Axle only)

Cylinder Pump

 .............................................................................................................. 6 gpm 2250 psi (Cyl. only)

Hydraulic Tank Capacity

 ............................................................................................................................. 15 Gallon

Oil Type

 .............................................................Chevron® Rando HD Prem MV Hyd Oil, Mobil® DTE 12 or 

 .......................................................................................................................................... 12Mor Castrol® - Aerial Lift

Tire Size

 ...................................Rear Wheels LT315/75R16 E Nitto Dune Grappler Tire 3860 Load Rating **

.......................................................................................................................................................... Front wheels 20.5 x 8/10

Wheel (Rear)

 ...........................16 x 10 Aluminum Procomp, Part Number 10696182, 3420 lb Load Rating

*Dump box capacity is reduced by the weight of any accessories, such as mats, Chutes, etc. and 
tools, such as shovels and rakes, which are stored on the Equipter.

**Replace with this tire of the equivalent.

• LT315/75R16 E Fuzion XTI

• LT315/75R16 E Kelly Safari TSR tire

• LT315/75R161E  Fierce MT tire

S P E C I F I C A T I O N S

36

Summary of Contents for RB4000















































Reviews:

No comments

Related manuals for RB4000

jcb JS Series Service Manual preview
JS Series
Brand: jcb Pages: 25
Ditch Witch RT45 Operator'S Manual preview
RT45
Brand: Ditch Witch Pages: 199
SANY SY215C LC Operation And Maintenance Manual preview
SY215C LC
Brand: SANY Pages: 272
Barreto 1824TK Operator'S Manual preview
1824TK
Brand: Barreto Pages: 20

Brands by name

Popular brands

Load more brands