Equipter RB4000, Service Manual

1

Recommended Service Schedule

We recommend doing the first preventative maintenance at about 30 service hours. Following this service, 
select maintenance tasks should be performed monthly, every six months, and so forth. Please refer 
to Index B: Service Checklist for a comprehensive list of preventative maintenance tasks and when to 
complete them.

Replacement Parts

Use only manufacturer-recommended replacement parts. Other parts may be substandard in fit and 
quality.

For additional replacement parts, contact the service provider (Index A).

Maintenance Precautions

Always take proper safety precautions while servicing this equipment. For complete RB4000 safety 
and operation guidelines, refer to the Operator’s Manual. If you do not have a manual, contact the 
manufacturer’s recommended service provider.

Always perform maintenance when the vehicle is level. 

Never do any maintenance or adjustments while the equipment is operating. Turn off the engine when 
performing maintenance to prevent accidental movement.

Never perform maintenance on this machine unless the dump box is completely in the transport position 
(fully retracted and lowered). To perform maintenance under the dump box, the box can be tilted in the 
dump position. It must be secured with the support arm in place. Never perform maintenance with the 
dump box in the lifted position. 

Make sure all operating and residual pressures are relieved before working on a hydraulic system. 

Shut engine off and operate all the controls to relieve any pressure.

Replace all safety shields and guards when finished performing maintenance. Do not operate the 
equipment with protective equipment removed.