July 2015 - Ed.1.2
E430 IP music and announcements server. User’s manual
Page 14
4.2.2.3.
Scheduled
This generator sends an announcement with a fixed schedule.
Similarly to the announcements generator, a short briefing is shown, to know more about the
configuration process, view section 5.6
Id
: Field to distinguish this generator from others.
Quality
4
: Quality of the audio sent. It must match the destinations one.
Start automatically
: If checked, the generator will start to check the conditions for sending
files right after saving the configuration, and when the device boots up. If unchecked, the
generator has to be enabled manually at the ‘Status’ section.
File
: File to send. The folder for this generator is always ‘\Scheduled’ (as each generator only
sends one message), and the add files option is added, which works just the same as the
section in the announcements generator.
Destinations
: A list of all the destinations available. As stated before, be cautious about the
qualities, to avoid sending audio in a format the destinations do not have configured.
Schedule
: List of individual conditions that must meet the system time in order to send the
announcement:
o
If it is set to don’t care (*), the condition won’t be checked.
o
In this example, the minute is the first condition specified, which means that the
announcement will be sent on the hour. This allows for an advanced schedule, if
several conditions are set.
Press
Apply
to commit changes made in the generator (if the configuration is invalid then an error
message will be shown next to this buttons). Press
Close
to discard changes made in the generator.
4
When quality is MP3, you should check which firmware version the ENA decoders have, as it may be necessary to activate the
‘Legacy RTP mp3’ checkbox in the Network configuration.
Figure 10 - Scheduled generator configuration
