9.
Click OK to close the window. From the main window, Save and then Close to
finalize the setup. You may be prompted to reboot your computer at this point.
5.2.2 Port
Settings
The follow section provides more details about the different port settings available with
the ComPort Redirector software. This information was obtained from the Lantronix
ComPort Redirector User Manual.
Timeout Reconnect: If checked, Com Port Redirector re-establishes the connection if the connection
times out. When auto-reconnecting, Com Port Redirector tries to reconnect until
the connection succeeds or you click the
Cancel
button in the pop-up connection
dialog box. If the port was closed by the communications application or by
clicking
Disconnect,
Com Port Redirector does not try to auto-reconnect.
Server Reconnect:
If checked, Com Port Redirector re-establishes the connection if the server closes
it. When auto-reconnecting, Com Port Redirector tries to reconnect until the
connection succeeds or you click the
Cancel
button in the pop-up connection
dialog box. If the port was closed by the communications application or by
clicking
Disconnect,
Com Port Redirector does not try to auto-reconnect.
Inband Listen:
If checked, Com Port Redirector uses the inband redirector protocol on inbound
connections from a Lantronix server. This protocol allows settings like modem
signals, baud rate and parity to be exchanged between Com Port Redirector and
the server.
Connection Timeout: Specifies the maximum number of seconds that the Com Port Redirector waits for
a connection to be made before giving up on this attempt. If
Timeout Reconnect
is enabled, each connection attempt lasts this long. If
Timeout Reconnect
is
disabled, the connection attempt fails after this interval and no more attempts are
made.
#815-1200 W73rd Ave, Vancouver, BC, V6P6G5, Canada Phone: 888-387-3787 or 604-266-8547 www.equustek.com
23
