DACCHTS
TS003 Heavy Duty Door Chain
Fitting Instructions
Position chain hook on door frame level with the chain anchor
and with hook uppermost. Mark screw holes, fit chain and
screw into position .
NOTE:
If fitting to hardwood drill 2.5mm pilot holes
Ensuring the chain anchor is flush with the edge of the door,
and mark screw holes. Screw into position .
Select position for door chain .
Fitting instructions for Timber Doors
Security Tips
- Always engage chain and ask for identification before
opening the door to strangers.
Safety Tips
- For additional safety we recommend the use of a ERA
160° Door Viewer or a ERA 180° Door Viewer.
Maintenance
- Use a moist cloth only, as household abrasives or
solvents may affect surface finish - lubrication may occasionally be
required.
Operation
- Slide flat plate onto slot in chain anchor. When chain is
not in use place the end ring on the chain hook.
Additional Information
C
B
A
A
A
B
C
B
C
ERA
, Valiant Way, Wolverhampton, WV9 5GB
Tel: 01922 490 049 Fax: 01922 494 420 Email: info@erahomesecurity.com
www.eraeverywhere.com
TS003 Standard
BS 8213-1:2004
PAS 24:2012
Requirements:
Door opening impacts (abuse mode) - The product and its fixings shall resist 200 door opening impacts when subjected to an
opening force of 100 N.
Door opening impacts (attack mode) - The product and its fixings shall be subjected to 3 impacts, after which the door opening
shall not exceed 25mm at the point of disengagement or 76mm “on guard” position.
Technical Information
