Erayak LGY20i, Owner'S Manual

Before using the product

14

  g.   Remove personal metal items such as rings, bracelets, necklaces, and 

watches when working with a lead-acid battery. A lead-acid battery 

can produce a short-circuit current high enough to weld a ring or the 

like to metal, causing a severe burn.

  h.   Connect any cable connected to the generator to a LEAD-ACID battery 

only. The generator’s 12 V DC outlet is not intended to supply power to 

a low voltage electrical system. Do not use the generator for charging 

dry-cell batteries that are commonly used with household appliances. 

These batteries may burst and cause injury to persons and damage to 

property.

  i. 

 NEVER attempt to charge a frozen battery.

Preparing to charge a battery 

  a.   Remove your vehicle’s battery from the vehicle.
  b.   Be sure the area around the battery is well ventilated.
  c.   Clean the battery terminals. Be careful to keep corrosion from coming 

into contact with your eyes.

  d.   Study the battery manufacturer’s specific precautions and follow these.
  e.   Determine voltage of battery by referring to your car's owner’s manual 

and make sure that it matches the rating of the generator.

Charging location

  a.   Locate the generator as far away from your battery as cable permits.
  b.   Do not operate in any closed-in area or restrict ventilation in any way.

Before using the product

Checking the generator and pack contents

•  Take the generator out of the packaging.
•  Check that the delivery is complete (see section: “List of contents and features”)
•  Check whether the generator or any of its individual parts are damaged.
•   If this is the case, do not use the generator. Contact the manufacturer at the 

service address specified on the warranty card.