ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Instruction manual
20056/57
Issue:
03
/2018
Changes, print, punctuation and other errors reserved!
Page 9
GB - INSTRUCTION MANUAL
6. NOISE EMISSION VALUES
7. IMPORTANT INFORMATION FOR INITIAL OPERATION
8. OPERATION INSTRUCTIONS
Attach the gravity/suction cup (1) to the spray gun.
Fill the cup with paint/liquid.
Connect the spray gun to a suitable air compressor.
Check the needle pack (3) and make sure everything is airtight.
Adjust the spray shape regulator (4) and the paint flow regulator (5) to your liking.
The spray gun is now ready for use.
Clean the spray gun after use with suitable cleaning agent.
See technical data.
See operation instructions.
9. SERVICE AND REPLACEMENT PARTS
All rights reserved. This manual is copyrighted. Reproduction in and form (digital, print, etc.) is
strictly prohibited without the written permission of ERBA GmbH.
Our products are packed in order to prevent damage during transport. Packing materials are va-
luable resurces and therefore can and should be recycled. The product itself consists of various
materials (metals, oils, plastic, etc.) and should be disposed with care and in accordance with your
federal and local disposal regulations.
12. LEGAL INFORMATION
11. DISPOSAL
Legal warranty regulations apply.
10. WARRANTY
Use original spare parts only.
