22
02
Saw blade (Fig. A, B, C, D)
WARNING!
Always use blades according to the intended use!
For example, never use a saw blade intended for working on wood for
working on metal/tiles or vice versa!
Observe the technical specifications of this product and the saw blades
when purchasing and using blades!
Attachments are sharp and hot after use! Handle them with care! Wear
safety gloves when handling attachments to avoid injuries like burns and
cuts!
WARNING!
Never press the spindle locking button (2) whilst the spindle
is rotating!
The direction-of-rotation arrow on the saw blade (12) should comply with
the one beside the spindle.
Replace a worn or damaged saw blade.
1. Loosen the four screws anti-clockwise on the base plate (5) and remove them with
the base plate (Fig. A). Do not detach the four screws from the base plate.
2. Press the spindle locking button (2) fully and hold it in position. (Fig. B)
3. Turn the outer flange (20) slightly with the spanner (17) until the spindle (21) is
locked.
4. Loosen the outer flange (20) anti-clockwise and remove it together with the saw
blade (12). (Fig. C).
5. Place a new saw blade on the spindle (21) and make sure that the bore of the saw
blade fits to the inner flange properly. Ensure that the rotational direction indicated
on the saw blade is the same as the one shown beside the spindle.
6. Secure the saw blade (12) with the outer flange (20) (Fig. D). Tighten the outer
flange (20) clockwise with the spanner (17).
7. Turn the saw blade (12) by hand to test if it is rotating smoothly. It should not flutter.
8. Attach the base plate (5) and secure it with the four screws. Ensure it is secured
properly.
860 W Biscuit joiner_MNL_EBJ860_TPS_GB_V1_V20518_20180605.indd 22
6/5/18 9:04 AM
