background image

31

30

•  Switch the product off and remove the battery pack. 
•  Protect the product from any heavy impact or strong vibrations which may occur during 

transportation in vehicles.

•  Secure the product to prevent it from slipping or falling over.

STORAGE

•  Switch the product off and remove the battery pack.
•  Clean the product as described above.
•  Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.
•  Always store the product in a place that is inaccessible to children. The ideal storage 

temperature is between 10 °C and 30 °C.

•  We recommend using the original package for storage or covering the product with a 

suitable cloth or enclosure to protect it against dust.

RECYCLING AND DISPOSAL

Waste electrical products should not be disposed of with household waste. 

Please recycle where facilities exist. Check with your Local Authority or retailer 

for recycling advice. 

DISPOSAL OF AN EXHAUSTED BATTERY PACK

To preserve natural resources, please recycle or dispose of the battery pack 

properly. This battery pack contains Li-Ion batteries. Consult your local waste 

authority for information regarding available recycling and/or disposal options. 

Discharge your battery pack by operating your tool, then remove the battery 

pack from the tool housing and cover the battery pack connections with heavy-

duty adhesive tape to prevent short circuit and energy discharge. Do not 

attempt to open or remove any of the components.

 GUARANTEE

At 

Erbauer

 we take special care to select high quality materials and use manufacturing 

techniques that allow us to create ranges of products incorporating design and durability. 

That’s why we offer a 2 year trade guarantee against manufacturing defects on our 

Erbauer

 power tool products.

This power tool is guaranteed for 2 years from the date of purchase, if bought in store, 

delivered or bought online. You may only make a claim under this guarantee upon 

presentation of your sales receipt or purchase invoice. Please keep your proof of 

purchase in a safe place.
This guarantee covers product failures and malfunctions provided the 

Erbauer

 power 

tool was used for the purpose for which it is intended and subject to installation, cleaning, 

care and maintenance in accordance with standard practice and with the information 

contained above and in the user manual. This guarantee does not cover defects and 

damage caused by or resulting from:

•  Normal wear and tear, including accessory wear
•  Overload, misuse or neglect
•  Repairs attempted by anyone other than an authorised agent
•  Cosmetic damage
•  Damage caused by foreign objects, substances or accidents
•  Accidental damage or modification
•  Failure to follow manufacturer’s guidelines
•  Loss of use of the goods

This guarantee is limited to parts recognised as defective. It does not, in any case, cover 

ancillary costs (movement, labour) and direct and indirect damage. 
If the 

Erbauer

 power tool is defective during the guarantee period, then we reserve 

the right, at our discretion, to replace the item with a product of equivalent quality and 

functionality or to provide a refund. 
This guarantee only applies to the country of purchase or delivery and is not transferrable 

to any other countries. This guarantee is non-transferrable to any other person or 

product. Relevant local law will apply to this guarantee. 
Guarantee related queries should be addressed to a store affiliated with the distributor 

you purchased the 

Erbauer

 power tool from.

This guarantee is in addition to and does not affect your statutory rights relating to faulty 

goods as a consumer.

Summary of Contents for EBC18-Li






















Reviews: