background image

17

16

c. 

Do not pierce the battery with nails, strike the battery with a 

hammer, step on the battery or otherwise subject it to strong 

impacts or shocks.

d. 

Do not solder directly onto the battery.

e. 

Do not expose battery to water or salt water, or allow the 

battery to get wet.

f. 

Do not disassemble or modify the battery. 

g. 

Do not place the battery in or near fire, on stoves or other 

high temperature locations. Do not place the battery in direct 

sunlight, or use or store the battery inside cars in hot weather. 

h. 

Do not place the battery in microwave ovens, high-pressure 

containers or on induction cookware.

i. 

If you intend to store a battery for a period without use then 

store battery at room temperature (19°C to 25°C), charged 

to about 30 – 50% of capacity. When storing for very long 

periods boost charge the battery once per year to prevent over 

discharge.

The following information applies to professional users only but is 

good practice for all users:

ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST

The updated Control of Substances Hazardous to Health 

Regulations 1st October 2012 now also targets to reduce the 

risks associated with silica, wood and gypsumdusts. Construction 

workers are one of the at-risk groups within this because of the 

dust that they breathe: silica dust is not just a nuisance; it is a real 

risk to your lungs!
Silica is a natural mineral present in large amounts in things like 

sand, sandstone and granite. It is also commonly found in many 

construction materials such as concrete and mortar. The silica is 

broken into very fine dust (also known as Respirable Crystalline 

Silica or RCS) during many common tasks such as cutting, drilling 

and grinding. Breathing in very fine particles of crystalline silica 

can lead to the development of: Lung cancer Silicosis Chronic 

Obstructive Pulmonary Disorder/Chronic obstructive pulmonary 

disease (COPD) And breathing in fine particles of wood dust can 

lead to the development of Asthma. The risk of lung disease is 

linked to people who regularly breathe construction dust over a 

period of time, not on the odd occasion.
To  protect the lung, the COSHH Regulations  sets a limit on the 

amount   of these dusts that you can breathe (called a Workplace 

Exposure Limit   or WEL) when averaged over a normal working 

day. These limits are not a large amount of dust: when compared 

to a penny it is tiny – like a small pinch of salt: This limit is the legal 

maximum; the most you can breathe after the right controls have 

been used.

HOW TO REDUCE THE AMOUNT OF DUST?

1.  Reduce the amount of cutting by using the best sizes of building 

products. Use a less powerful tool e.g. a block cutter instead of 

angle grinder.

2.  Using a different method of work altogether – e.g. using a nail 

gun to direct fasten cable trays instead of drilling holes first.

3.  Please always work with approved safety equipment, such 

as those dust masks that specially designed to filter out 

microscopic particles and use the dust extraction facility at all 

time.

For more information please see the HSE website: http://www.hse.

gov.uk/construction or http://www.hse.gov.uk/pubns/cis69.pdf

Summary of Contents for ECS18-Li




















Reviews: