Erbauer ERB382SDR, Original Instructions Manual

450W 150MM ROTARY SANDER

Start your sander before sanding and turn it off 

only after you stop sanding. For the best results, 

sand wood in the direction of the grain.

Do not start sanding without having the sandpaper 

fitted.

Do not allow the sand paper to wear away it will 

damage the base-plate. The guarantee does not 

cover base-plate wear and tear.

Use coarse grit paper to sand rough surfaces, 

medium grit for smooth surfaces and fine grit for 

the final surfaces. If necessary, first make a test 

run on scrap material.

Use only good quality sand paper.

The sand paper controls the sanding efficiency, 

not the amount of force you apply to the tool. 

Excessive force will reduce the sanding efficiency 

and cause motor overload. Replacing the sand 

paper regularly will maintain optimum sanding 

efficiency.

MAINTENANCE

Remove the plug from the socket before 

carrying out any adjustment, servicing or 

maintenance.

Your power tool requires no additional lubrication 

or maintenance. There are no user serviceable 

parts in your power tool. Never use water or 

chemical cleaners to clean your power tool. Wipe 

clean with a dry cloth. Always store your power 

tool in a dry place. Keep the motor ventilation 

slots clean. Keep all working controls free of 

dust. Occasionally you may see sparks through 

the ventilation slots. This is normal. If the supply 

cord is damaged, it must be replaced by the 

manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard. 

ENVIRONMENTAL PROTECTION

Waste electrical products should not be 

disposed of with household waste. Please 

recycle where facilities exist. Check with your 

Local Authority or retailer for recycling advice. For 

further information visit www.recycle-more.co.uk