Erbauer ERB382SDR, Original Instructions Manual

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in 

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

.

The term “power tool” in the warnings refers to your mains-operated 

(corded) power tool or battery-operated (cordless) power tool.

1.  Work area safety

a. Keep work area clean and well lit.

 Cluttered or dark areas 

invite accidents.

b. Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases or dust. 

Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a 

power tool.

 Distractions can cause you to lose control.

2.  Electrical safety

a. Power tool plugs must match the outlet. Never modify the 

plug in any way. Do not use any adapter plugs with earthed 

(grounded) power tools.

 Unmodified plugs and matching outlets 

will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, 

such as pipes, radiators, ranges and refrigerators. 

There 

is an increased risk of electric shock if your body is earthed or 

grounded.

c. Do not expose power tools to rain or wet conditions.

 Water 

entering a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, 

pulling or unplugging the power tool. Keep cord away from 

heat, oil, sharp edges or moving parts. 

Damaged or entangled 

cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension 

cord suitable for outdoor use. 

Use of a cord suitable for outdoor 

use reduces the risk of electric shock. 

f. If operating a power tool in a damp location is unavoidable, 

use a residual current device (RCD) protected supply.

 Use of 

an RCD reduces the risk of electric shock.