Fig. 8
Fig. 9
Fig. 12
Fig. 11
Fig. 10
2. ADJUSTING CHANNEL WIDTH
Turn off and unplug the tool. There are 6pcs
of distance washers for adjusting the channel
width. The thickness of these washers is about
4.3mm. Loose the outer lange anti-clockwise by
the spanner (See Fig. 2), take out the distance
washers. Position the cutting discs at the expected
width (See Fig.
8,9).Place the other distance
washers and cover the outer lange, then tighten it
clockwise fully.
3. ADJUSTING CHANNEL DEPTH
Loosen the lange cap lock knob(
See Fig. 10) and
lower the base plate away from the ixed guard
(See Fig. 11).
Set the cutting depth as the scale provided and
tighten the knob clockwise to lock.
4. INSTALLING THE AUXILIARY HANDLE (See
Fig. 12)
For your personal safety we recommend using the
auxiliary handle at all times.
To it the handle, rotate the handle anti-clockwise
until it is secured fully.
Note:
This handle should be used at all times to
maintain complete control of the tool.
Summary of Contents for ERB383WCH
