ERBAUER 210MM (8-1/4”) SLIDING COMPOUND MITRE SAW
TECHNICAL DATA
Volts: 230V~50Hz
Power input: 1400W
No-load speed: 4500min-1
Double insulation: Class 2
Net weight: 14.05kg
Blade: Ø210 mm ; Ø30 mm Bore
Minimum Blade thickness 1.8mm Kerf 3.0mm
Turntable Ø295 mm
Mitre stops 0°,15°, 22.5°, 31.6°, 45° Left & Right
Mitre angle range 45° Left & Right
Bevel angle range 0° to 45° Left
Maximum capacity
Cross cut (0° Bevel x 0° Table) 63mm x 233mm
Mitre cut (0° Bevel x 45° Table) 63mm x 117m
Bevel cut (45° Bevel x 0° Table) 46mm x 233mm
Compound cut (45° Bevel x 45° Table) 46mm x 117mm
NOISE AND VIBRATION DATA
Sound pressure level LPA: 94 dB(A) (K=3dB(A))
Sound power level LWA: 107 dB(A) (K=3dB(A))
Vibration level: 3.384m/s2 (K=2.5m/s2)
- The declared vibration total value has been measured in accordance with a
standard test method and may be used for comparing one tool with another.
- The declared vibration total value may also be used in a preliminary assessment of
exposure.
WARNING!
The vibration emission during actual use of the power tool can differ
from the declared total value depending on the ways in which the tool is used; and
of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is switched off and when it is
running idle in addition to the trigger time).
ACCESSORIES
Allen Key 1 pc, Dust Bag 1 pc, Hold-Down Clamp 1 pc & Mitre Handle 1 pc