11
10
i. Wear eye protection when operating this tool.
j. When using this product it is essential that the following rules
for use are followed:
•
When drilling it is common that the core / drill bit jams in the
material being drilled. This will result in the drill trying to rotate
around the drill bit and potentially come out of your grip. This
product has a safety clutch mechanism. This safety clutch
mechanism will be activated and stop the drive to the drill bit
BUT only if you resist the initial forces caused by the jamming
by securely holding the drill with both hands.
•
ALWAYS ensure that the auxiliary handle is firmly affixed and
secure.
•
The auxiliary and main handle must be firmly held to resist any
movement of the product when the core drill or drill bit becomes
jammed.
•
ALWAYS use this drill when standing on a firm and secure platform
or the ground. (DO NOT USE ON LADDERS OR STEPS.)
• NEVER start the product with the core or drill jammed in
position.
• DO NOT stretch to hold the product. Do not drill above shoulder
height or below knee height, as the product cannot be securely held.
ADDITIONAL SAFETY WARNINGS FOR BATTERY
a.
Do not connect the positive terminal and negative terminal of
the battery to each other with any metal object (such as wire).
b.
Do not carry or store battery together with necklaces, hairpins
or other metal objects.
c.
Do not pierce the battery with nails, strike the battery with a
hammer, step on the battery or otherwise subject it to strong
impacts or shocks.
d.
Do not solder directly onto the battery.
e.
Do not expose battery to water or salt water, or allow the
battery to get wet.
f. Do
not expose a battery pack or tool to fire or excessive
temperature.
Exposure to fire or temperature above 130 °C
may cause explosion.
g. Fo
llow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions.
Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
SERVICE
a. Ha
ve your power tool serviced by a qualified repair person
using only identical replacement parts.
This will ensure that
the safety of the power tool is maintained.
b. N
ever service damaged battery packs.
Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
HAMMER SAFETY WARNINGS
a. Wear ear protectors.
Exposure to noise can cause hearing loss.
b. Use auxiliary handle(s), if supplied with the tool.
Loss of
control can cause personal injury.
c. Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring.
Cutting accessory contacting a “live”
wire may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
d. Always wear a dust mask.
e. Persons under 16 years of age are not permitted to operate this
machine.
f. Keep the tool and accessories out of the reach of children.
g. Always check walls and ceilings to avoid hidden power cables
and pipes.
h. After long working periods, external metal parts and
accessories could be hot.
