18V LI-ION TORCH
3. Reasons for different battery pack
working times.
Charging time problems, as above, and having
not used a battery pack for a prolonged storage
will reduce the battery pack working time. This can
be corrected after several charge and discharge
operations by charging & working with your lamp.
Do not re-charge your battery pack below 0
o
C and
above 40
o
C as this will affect performance.
MAINTAIN TOOLS WITH CARE
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean.
HOT battery pack protection
The normal charging temperature is between 0
o
C
and 40
o
C. When the allowable battery temperature
of 40
o
C is exceeded, charging will suspend until it
has reached the correct temperature. The normal
discharging/working temperature is between 0
o
C
and 75
o
C. When the allowable battery temperature
of 75
o
C is exceeded, the electronic control
switches off the power tool until the temperature
is in the optimum temperature range again.
Battery pack overload and low-voltage
protection
When max. allowable battery current is exceeded
during working, the overload protection
is activated to protect the battery against
overheating.
When the battery is under normal voltage during
working, the power tool will cease to operate.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. For further
information visit www.recycle-more.co.uk
