Erbauer ERI692IPD, Original Instructions Manual

18V BRUSHLESS IMPACT DRIVER 

     ERI692IPD

Health surveillance

All employees should be part of an employer’s health surveillance scheme to help identity 

any vibration related diseases at an early stage, prevent disease progression and help 

employees stay in work.

Double insulation 

The charger is double insulated. This means that all the external metal parts are electrically

insulated from the mains power supply. This is done by placing insulation barriers between 

the electrical and mechanical components making it unnecessary for the tool to be earthed.

Vibration and noise reduction 

To reduce the impact of noise and vibration emission, limit the time of operation, use low-

vibration and low-noise operating modes as well as wear personal protective equipment.

Take the following points into account to minimize the vibration and noise exposure risks:

1.  Only use the product as intended by its design and these instructions.

2.  Ensure that the product is in good condition and well maintained.

3.  Use correct application tools for the product and ensure they in good condition.

4.  Keep tight grip on the handles/grip surface.

5.  Maintain this product in accordance with these instructions and keep it well lubricated

  (where appropriate).

6.  Plan your work schedule to spread any high vibration tool use across a number of days.

Familiarise yourself with the use of this product by means of this instruction

manual. Memorise the safety directions and follow them to the letter. This will

help to prevent risks and hazards.

1.  Always be alert when using this product, so that you can recognise and handle risks early.

  Fast intervention can prevent serious injury and damage to property.

2.  Switch off and disconnect from the power supply if there is any malfunction. Have the

  product checked by a qualified specialist and repaired, if necessary, before you put it into

  operation again.

Residual risks

Even if you are operating this product in accordance with all the safety requirements,

potential risks of injury and damage remain. The following dangers can arise in connection

with the structure and design of this product:

1.   Health defects resulting from vibration emission if the product is being used over long

  periods of time or not adequately managed and properly maintained.

2.   Injuries and damage to property due to broken application tools or the sudden impact of

  hidden objects during use.

3.   Danger of injury and property damage caused by flying objects.

Warning: 

This product produces an electromagnetic field during operation! This field 

may under some circumstances interfere with active or passive medical implants! To 

reduce the risk of serious or fatal injury, we recommend persons with medical implants to 

consult their doctor and the medical implant manufacturer before operating this product!

Important note:

Be sure the supply is the same as the voltage given on the rating plate for the charger. The

charger is fitted with a two-core cable and plug.

Remove the mains plug from socket before carrying out any adjustment or servicing.