PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the fitted plug then follow the
instructions below.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
BLUE =NEUTRAL
Brown = Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows. The wire which is coloured blue
must be connected to the terminal which is marked
with N. The wire which is coloured brown must be
connected to the terminal which is marked with L.
Warning:
Never connect live or neutral wires to the earth
terminal of the plug.
Only fit an approved 13AMP
BS1363/A plug and the correct rated fuse.
Note:
If a moulded plug is fitted and has to be
removed take great care in disposing of the plug
and severed cable, it must be destroyed to prevent
engaging into a socket.
13 Amp fuse approved
to BS 1363
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Brown L(live)
Cable grip
Summary of Contents for ERI692IPD
Page 1: ...18V BRUSHLESS IMPACT DRIVER ERI692IPD ERI692IPD...
Page 2: ...Original Instructions Version 2 0...
Page 24: ......
