Erbauer ERI692IPD, Original Instructions Manual

18V BRUSHLESS IMPACT DRIVER 

     ERI692IPD

f. If operating a power tool in a damp location is unavoidable, 

use a residual current device (RCD) protected supply.

 Use of 

an RCD reduces the risk of electric shock.

3.  Personal safety

a. Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a power tool 

while you are tired or under the influence of drugs, alcohol 

or medication. 

A moment of inattention while operating power 

tools may result in serious personal injury. 

b. Use personal protective equipment. Always wear eye 

protection. 

Protective equipment such as dust mask, non-skid 

safety shoes, hard hat, or hearing protection used for appropriate 

conditions will reduce personal injuries. 

c. Prevent unintentional starting. Ensure the switch is in 

the off-position before connecting to power source and/or 

battery pack, picking up or carrying the tool. 

Carrying power 

tools with your finger on the switch or energising power tools that 

have the switch on invites accidents. 

d. Remove any adjusting key or wrench before turning the 

power tool on. 

A wrench or a key left attached to a rotating part of the power tool 

may result in personal injury. 

e. Do not overreach. Keep proper footing and balance 

at all times. 

This enables better control of the power tool in 

unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. 

Keep your hair, clothing and gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in moving 

parts.

g. If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used.

 Use of dust collection can 

reduce dust-related hazards.