Erbauer ERI692IPD, Original Instructions Manual

4.  Power tool use and care

a. Do not force the power tool. Use the correct power tool for 

your application. 

The correct power tool will do the job better and 

safer at the rate for which it was designed. 

b. Do not use the power tool if the switch does not turn it on 

and off.

 Any power tool that cannot be controlled with the switch 

is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or 

the battery pack from the power tool before making any 

adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the 

power tool accidentally. 

d. Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool or 

these instructions to operate the power tool.

 Power tools are 

dangerous in the hands of untrained users. 

e. Maintain power tools. Check for misalignment or binding 

of moving parts, breakage of parts and any other condition 

that may affect the power tool’s operation. If damaged, 

have the power tool repaired before use.

 Many accidents are 

caused by poorly maintained power tools. 

f. Keep cutting tools sharp and clean.

 Properly maintained 

cutting tools with sharp cutting edges are less likely to bind and 

are easier to control. 

g. Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into account the 

working conditions and the work to be performed.

 Use of 

the power tool for operations different from those intended could 

result in a hazardous situation. 

5.  Battery tool use and care

a) Recharge only with the charger specified by the 

manufacturer.

 A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another battery 

pack.

b) Use power tools only with specifically designated battery