Erbauer ERI692IPD, Original Instructions Manual

18V BRUSHLESS IMPACT DRIVER 

     ERI692IPD

any evidence of overheating then IMMEDIATELY disconnect the 

charger from the power supply.

7.  If gas or smoke is emitted from the battery during charging switch 

off the power supply , and move to a well vented area to allow the 

fumes to vent to atmosphere. 

Caution is there is leaking liquid from the battery wear protective 

clothing, glasses and clothes as this can be acidic. 

8.  Always disconnect battery charger and remove battery from 

charger when the charging is complete. 

9.  Only use the battery charger specifically stated on the base of 

the battery.

10. Please always place the charger on a firm smooth surface to 

ensure air circulation to the vents on the bottom. Blocking these 

vents could cause over heating.

FOR BATTERY

1.  Always remove the battery pack from the charger immediately 

after re-charging is completed.

2.  When not in use, remove a charged battery pack from the 

charger.

3.  Do not charge a damaged battery pack.

4.  Do not charge non-rechargeable batteries.

5.  Do not install the battery backwards so the polarity is reversed.

6.  Do not connect the positive terminal and negative terminal of the 

battery to each other with any metal object (such as wire).

7.  Do not carry or store battery together with necklaces, hairpins or 

other metal objects.

8.  Do not pierce the battery with nails, strike the battery with a 

hammer, step on the battery or otherwise subject it to strong 

impacts or shocks.

9.  Do not solder directly onto the battery.

10. Do not expose battery to water or salt water, or allow the battery 

to get wet.

11. Do not disassemble or modify the battery. The battery contains 

safety and protection devices, which, if damaged, may cause 

the battery to generate heat, explode or ignite. The protection