Erbauer ERI717DDR, Original Instructions Manual

18V BRUSHLESS DRILL DRIVER 

      ERI717DDR

OPERATING INSTRUCTIONS

NOTE: 

Before using the tool, read the 

instruction book carefully.

INTENDED USE:

The machine is intended for driving in and 

loosening screws as well as for drilling in wood, 

metal and plastic.

1. CHARGING YOUR BATTERY PACK 

Warning: The charger and battery pack are 

specifically designed to work together so do not 

attempt to use any other devices. Never insert or 

allow metallic objects into your charger or battery 

pack connections because an electrical failure and 

hazard will occur.

(A)BEFORE USING YOUR CORDLESS TOOL 

Your battery pack is UNCHARGED and you must 

charge once before use. When you charge the 

new battery or one which has not been used for 

long periods of time, it may not reach full charge 

until after you have discharged it fully in use and 

recharge it several times.

(B)CHARGING PROCEDURE (SEE FIG. A)

1) Plug the charger into an appropriate outlet. 

2) Slide the battery pack into the charger, the 

light(a) will be green and flash to indicate the 

charging process has started.

3) When charging is completed, the light(a) will 

stop flashing and be green. The pack is now fully 

charged, unplug the charger and remove the 

battery pack.  

WARNING: When battery charge runs out 

after continuously use or exposure to 

direct sunlight or heat, allow time for the tool 

to cool down before re-charging to achieve the 

full charge. 

(C)CHARGING INDICATOR 

This charger is designed to detect some problems 

that can arise with battery packs. Indicator lights 

indicate problems (see table below). If this occurs, 

insert a new battery pack to determine if the 

charger is OK. If the new battery charges correctly, 

then the original pack is defective and should be 

returned to a service center or recycling service 

center. If the new battery pack displays the same 

problem as the original Battery Pack, have the 

charger tested at an authorized service center.

a

REVERSE

OFF position

FORWARD

b

Fig. J

Fig. K

Fig. I

Fig. H

Fig. G

Fig. F2

Fig. F1

Fig. E

Fig. D

Fig. A

Fig. B1

Fig. B2

Fig. C2

Fig. C1