AIR NIBBLER
TECHNICAL SPECIFICATIONS
COMPONENT
SPECIFICATIONS
Maximum cutting capacity
Strokes per minute
Air inlet
Air hose (inner diameter)
Average air consumption
Working pressure
1.2mm MILD STEEL
3,800spm
1/4" BSP
3/8"
9.8cfm
90psi (6.3bar)
NOISE AND VIBRATION DATA
Sound pressure level LPA: 79 dB (A) (K=3dB(A))
Sound power level LWA: 90 dB (A) (K=3dB(A))
Vibration level: 4.2m/s
2
(K = 1.5m/s
2
)
-
The declared vibration total value has been measured in accordance with a
standard test method and may be used for comparing one tool with another.
-
The declared vibration total value may also be used in a preliminary
assessment of exposure.
WARNING!
The vibration emission during actual use of the power tool can
differ from the declared total value depending on the ways in which the tool
is used; and of the need to identify safety measures to protect the operator
that are based on an estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to help
reducehand arm vibration syndrome injuries to power tool users. The directive
requires power tool manufacturers and suppliers to provide indicative vibration test
results to enable users to make informed decisions as to the period of time a power
tool can be used safely on a daily basis and the choice of tool.
The declared vibration emission value should be used as a minimum level should be
used with the current guidance on vibration.
The declared vibration emission been measured in accordance with a standardised
test stated above and may be used to compare one tool with another.
The declared vibration emission value may also be used in a preliminary assessment
of exposure.