EG_GenLoc41e_1055_UG_003_UK
Page 14 / 71
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCOGENER reserves the right to make any modifications.
Dct_427_02
3.2 External connections
3.2.1 Connections
3.2.1.1 Antenna connectors
GSM antenna connector:
The GSM antenna connector is FAKRA-D female with a 50
Ω impedance.
GPS antenna connector:
The GPS antenna connector is FAKRA-C male with a 50
Ω impedance.
3.2.1.2 Micro FIT connectors
Female Micro FIT Connector with 4 male pins:
This connector of the GenLoc 41e is used for the external DC supply and the GPIOs (the 2 signals Input and
Output).
The pins 3 and 4 are used for the Input/Output functions. The modem can only be powered
by the pins 1 (+V
DC
) and 2 (GND).
Female Micro FIT connector with 2 male pins:
This connector of the GenLoc 41e is used for the GPIO (2 Input signals).
Pin N°
Standard
name
Circuit
I/O Option
I/O Option
I/O
Option
I/O
1
INPUT 3
Opto
5 / 35 V
I
Input/Output
0-3V non opto
(GPIO)
I/O
INPUT One
Wire Dallas
0-3V non opto
I/O
INPUT One Wire
multi-slaves 0-3V
I/O
2
INPUT 2
Opto
5 / 35 V
I
Input/Output
0-3V non opto
(GPIO)
I/O
Analog Input
ANA-1 0-10V
I
Pin N°
Signal
1
+V
DC
2
GND
3
INPUT 1(E1)
4
OUTPUT (S1)