R U/L/H Series
User Guide, Rev. 00 (May 2015)
15
3.2.1
Setting up the connection
After you connect all necessary cables (see Setting up the modem Setting up the modem) you can
set up connection. Connect UTP cable to your computer and go to Internet protocol TCP/IP
properties (
Network connections -> Local Area Connection ->Internet protocol TCP/IP->
Properties
) and set your IP address as 192.168.1.x. Please read how to change TCP/IP settings of
your network card in this thread (for Windows 7):
http://windows.microsoft.com/en-us/windows/change-tcp-ip-settings#1TC=windows-7
Now modem will connect your computer and its configuration page can be seen by going to default
IP address in your browser
192.168.1.234
.
3.2.2
Modem status page
Go to your web browser and put IP address
192.168.1.234
. You will be asked for username and
password. By default it is:
Username:
admin
Password:
12345
If everything is configured correctly you should see following screen: