R U/L/H Series
User Guide, Rev. 00 (May 2015)
43
3.4
Device Manager
Device Manager is an application which allows you to find U/L/H modems in local area network
(LAN) and then restore factory settings by entering their IMEI number. It is particularly useful when
you forgot IP number of device and you can't access it by terminal on serial port.
The installation process is pretty simple-you launch .exe file and choose path where to unpack the
application. The main window of program consists of table-list of devices available on your network
and buttons: Scan, Clear List, Reset and About. First you need to scan the network for devices. It
takes few seconds to list all the devices. Please also keep in mind that it takes a while to boot
modem so it won't respond immediately after you turn it on.
When the scan is complete you can see list of available devices in the table. You can review
information like IP address, MAC address, device name, firmware version and uptime. If you want
to restore factory settings on any device on the list, click the Reset button and enter IMEI. Program
will send special packet to all devices, but only the one with IMEI you have entered will be affected.
If the IMEI is correct and the factory settings have been restored you should see ,,IMEI OK'' in one
of cells of last column. This device will now reset to load new settings and after about 1-2 minutes
it will confirm that whole operation was successful - you should see then that ,,IMEI OK'' will change
to ,,done''.
