SR2 Technical Manual EN
Indice : C
25/03/2019
Firmware v2.9
21 / 31
ERECA SAS - 75 rue d'Orgemont, 95210 St Gratien France
T : +33 1 39 89 76 23 W : www.ereca.fr
3 MANAGEMENT
3.1 WEB MANAGEMENT INTERFACE
The STAGE RACER 2 whole network can be monitored and configured through a single web interface.
The RJ45 Ethernet
admin port
(not IP1 neither IP2) provides access to the embedded web server interface.
Note: Firefox browser preferred / minimal resolution of 1920x1080
Tip: To locate the IP address of the unit, use the Up/Down button on the front of the unit and navigate to the
IP address section (cf.
2.4.8
) and type the IP in your browser (Stage racer 2 default is: 192.168.1.248).
3.1.1 Admin login / Language selection
It is necessary to have an administrator access to proceed with any changes in the configuration. First thing
to be done is to log in as Administrator by doing the following:
Click the icon on the top right bar and select “administrator login”; the default
password is “ereca”.
When the user is now connected as an administrator, the icon turns green.
Finally the web interface automatically detects the browser language. However it
is also possible to select a different one.
