16
> Check that your computer is correctly connected to your robot’s WiFi network
8
then initiate
the console again.
> If it still doesn’t work, please refer to the "Frequently Asked Questions" at the end of this manual.
7)
Now please go to the following chapter to configure your console and/or robot. It is very
important to do so at the first use; do not omit these steps.
6.4.
Configuring your console and robot
Please note that to configure the console and robot, you must be connected to your Spykee in
local mode with the
administrator name and password
(if you have not already changed it, the
username is "admin" and the password is also "admin").
6.4.1.
Console configuration /
General
tab
•
Click on the console configuration icon
•
The configuration window will open in the "Console Configuration" section in the "General" tab.
•
Media folder: select the directory in which you wish to store pictures and videos taken by
Spykee.
•
Joypad: select the control mode if joypads are available and connected to the computer.
A joypad is not necessary to play with Spykee.
•
Console customization: Select the "language" and the "appearance" of the console.
Standard Console
Cockpit Console
The console's appearance will be changed at the next console start-up. The "standard"
and "cockpit" appearances have exactly the same functions.
8
See Section 6.2 of this chapter.
