09
4. Adjust Gas Spring Tension
Be sure to keep the arm in
horizontal position during
adjustment. Or else, it
ZRXOGEHGLƋFXOWWRDGMXVW
the mount or damage the
mount.
1. If the monitor can stay at the desired height by itself,
no adjustment needed.
2. If the monitor rises up, press the arm to keep it in
horizontal position and then use the Large Allen Key (N)
to turn the bolt clockwise(“-” direction) to reduce
tension of the arm only until the monitor can stay at the
desired height by itself.
3. If the monitor falls down, lift the arm to keep it in
horizontal position and then use the Large Allen Key (N)
to turn the bolt counter-clockwise(“+” direction) to
increase tension of the arm only until the monitor can
stay at the desired height by itself.
+
-
N (Large
Allen Key)
Desk
+
+
01
02
03
04
05
06
07
08
09
11
10
