You need to set the following parameters before training:
Initial strain:
Strain of the first strain level [W]
Time:
Duration of each strain step [min]
Strain step:
Intensity of each strain step [W]
Recovery:
Strain in recovery phase [W]
How to create a new user profile (A-D):
1.
Push the PLUS/MINUS buttons until the programme WHO-PROFILES is
selected. Confirm your choice with the START button.
2.
Now push the PLUS/MINUS buttons until the desired user profile (A-D) is
selected. Push the STOP button to open the user profile editor.
3.
Press the PLUS and MINUS buttons to modify each of the parameters. Press
STOP to change to the next parameter. After setting the parameters, confirm
this with START. The modified parameters will be saved for other applications.
4.
You are now in the training mode. Press the STOP button to stop the strain
phase and to proceed to the recovery phase. 10 seconds before the strain step
ends, the remote start sequence will be output through the interface.
5.
By pushing the STOP-button one more time, you will return to the main menu.
The automatic strain increase in the preset as well as in the individual WHO profiles
can be interrupted during operation by pressing the START button. The displayed
information changes from ACTIVE to HOLD. In the HOLD mode, the performance can
be modified manually with the PLUS and MINUS buttons. If you want to reactivate the
automatic strain increase, press the START button again. The display changes from
HOLD to ACTIVE. In both modes, you can change from the strain phase to the
recovery phase by pressing the STOP button. The display changes to PASSIVE. This
allows the doctor to adjust the strain for his patient more precisely than before.
7.1.6
COUNTDOWN
In diesem Modus können Sie nach einer vorher festgelegten Dauer trainieren und
dabei die Belastung selbst festlegen. Das Countdown-Training unterscheidet die
Programme Manuell- und Cardio-Countdown.
Manual countdown:
1.
Push the PLUS/MINUS buttons until the programme COUNTDOWN is selected.
Confirm your choice with the START button.
2.
Choose the MANUAL programme with the PLUS and MINUS buttons and
confirm this with START.
3.
Reduce or increase the time to the desired training duration by pressing the
PLUS and MINUS buttons. Confirm this with START.
Technical and optical modifications as well as misprints reserved -
© 2011
by ERGO-FIT GmbH & Co. KG
3 9
CARDIO LINE 400/400 MED
