Technical and visual modifications as well as misprints reserved -
© 2018
by ERGO-FIT GmbH & Co. KG
Setup
6
Setup
6.1
Switching On
⊗
Before switching on your exercise machine, make sure the machine is plugged in.
If you have connected several ERGO-FIT machines to one circuit never switch on multiple
machines at the same time. Otherwise technical problems might occur.
⊗
Now switch on your machine by pressing the switch next to the power entry module
(not applicable with TRAC, see next paragraph). The switch must be in position I. If
the switch is in position O the machine is switched off.
⊗
The TRAC model is switched on by activating the circuit breaker. Please make sure
that the key switch is set to position 1 and that the emergency stop button is
unscrewed. The key switch protects the treadmill against unauthorized operation.
⊗
The illumination of the display shows you immediately if the machine is switched
on.
⊗
The machines of the 4000 SP and 4000 S SP series are switched on by turning the
pedals. As soon as the voltage exceeds a certain threshold value, the machine
switches on automatically and the battery provides the energy supply until the
workout / test begins.
6.2
Switching Off
⊗
Switch off your machine by pressing the switch next to the power entry module (not
applicable with TRAC, see next paragraph). The switch must be in position O.
Take care that the switch-on and switch-off intervals don‘t fall below a time of 3 sec.
⊗
The TRAC model needs to be turned off by switching off the automatic circuit
breaker. If there is a risk of falling or in an emergency, please use the front central
emergency stop switch. The treadmill will stop immediately. For this reason, use the
emergency stop button only in case of an emergency. To restart the machine, turn
the emergency stop button to unlock it.
With the TRAC model, make sure to wait for at least 30 seconds between switching on and
switching off. Otherwise the treadmill‘s motor control may be malfunctioning.
⊗
The machines of the 4000 SP und 4000 S SP series switch off automatically when
the pedals are not in motion.
6.3
The Right Workout Technique
The heart rate controlled workout based on the ERGO-FIT point system makes sure that you
exercise with optimum intensity. However, you should also take into account biomechanical
considerations when exercising. This section provides information on relevant aspects for
every cardio exercise machine.
3 4
