Technical and visual modifications as well as misprints reserved -
© 2018
by ERGO-FIT GmbH & Co. KG
Operation
7.1.2
CARDIO LINE 4100
At start the panel PC always displays the main menu with the following options:
⊗
MANUAL
⊗
MANUAL COUNTDOWN
⊗
MANUAL GEARSHIFT
(CYCLE and RECUMBENT only)
⊗
CARDIO
(CARDIO LINE 4100 S/S MED/S SP only)
⊗
PROFILE
⊗
TEST
(TRAC series 4100 S/S MED only, CYCLE dependent on the test-mode)
⊗
ENTERTAINMENT
If you are in a submenu and want to return to the main menu just press STOP once or several
times.
Note! Pacemaker patients are recommended to only use the MANUAL mode!
7.1.2.1
MANUAL
In this mode you can choose any workout time and workload.
1.
In the main menu press MANUAL.
2.
You now access the workout mode. Here you can change the workload by pressing
PLUS/MINUS. If you want to change the workload substantially, press and hold the
PLUS/MINUS. If you want to change the graph view press the blue arrow on the
right below the heart rate and performance graph.
3.
Stop the workout by pressing the STOP button. The workout parameters (Watt, 1/
min etc.), the heart rate graph and the performance graph remain on the display. By
pressing STOP again you return to the main menu.
7.1.2.2
MANUAL CD (MANUAL COUNTDOWN)
In this mode you can manually customize the workout and workout time. The timer counts
down the set workout time.
1.
In the main menu press MANUAL COUNTDOWN.
2.
The MANUAL COUNTDOWN submenu is displayed. Enter your body weight
(STAIR and TRAC only) by pressing PLUS/MINUS (default: 70 kg). Confirm your
selection with START.
3.
This brings you to the “Time” parameter. Here you can set the workout time. Select
a workout time from 0 to 60 minutes (default time: 20 minutes). You can increase /
decrease the workout time by pressing PLUS and MINUS, or you can manually
6 0