CARDIO LINE 4000 S/S MED/MED/SP/S SP
CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved -
© 2018
by ERGO-FIT GmbH & Co. KG
Menu „System“:
Select „dynamic“ (default) or „static“ by touching the option. The current selection is
highlighted in green. For the changes to take effect you have to restart the device.
⊗
Setting the static IP adress:
„IP address“, „Net Mask“ and „Gateway“ can be changed. Select the option by
touching it. It will be highlighted in blue. Now you can enter the serial number via the
numeric panel. Here you also find the device‘s MAC address.
⊗
Setting up the Touchscreen:
Use the arrow buttons on the right and left side of the scroll bar to select „capacitive“
or „resitive“.
Menü „Service“
(this menu should only be operated by an ERGO-FIT service technician):
⊗
Operation time:
Here the previous operation time in km and minutes/hours are shown.
⊗
Next service interval
Here you can see the kilometers which have to be absolved until the next desired
service interval.
⊗
Last service interval
Here you can see the when the last service interval has been performed.
⊗
Service interval
setting
With the arrows to the right and to the left of the scrollbar you can switch beetween
the different service intervals (250km, 500km,…). An oilcan is shown in the display
to the right of the clock when the set distance is reached.
⊗
Device name, MTK, Export conf.
and
Service performed
:
These functions must only be used by authorized ERGO-FIT service personnel.
7.5
Heart Rate Control
For optimal results we recommend heart rate controlled workout. With a POLAR transmitter
you can always display the current heart rate and adapt the workout accordingly.
All heart rate monitoring devices are tested at our factory before delivery. The heart rate is
compared to the corresponding displays of a Polar heart rate monitor. Only appropriately
certified heart rate monitors and receivers are used for the test.
7 7
