27
Always set logs firmly on the log
retaining plates and work table. Make
sure logs will not twisk, rock or slip
while being split. Do not force the
blade by splitting the log on the upper
part. This will break the blade or
damage the machine.
IMPORTANT !
Before splitting a log:
1. Pull the pin (32) from the plunjer (29).
2. To prevent the guide plate (A) from being damaged:
ALWAYS put the pin (32) in one of the 3 holes of the pressure plate (33)
(for big logs nearby the pressure plate and for smal logs far away from
the pressure plate).
Break log in the direction of its growing grain. Do not place log across the log
splitter for splitting. It may be dangerous and may seriously damage the
machine.
Do not attempt to split 2 pieces of logs at the same time. One of them may fly up
and hit you.
Summary of Contents for 77205
Page 45: ...43...
Page 46: ...44 MONTAGE INSTRUCTIES MONTAGE ANWEISUNGEN ASSEMBLY INSTRUCTIONS NOTICES DE MONTAGE...
Page 50: ...48 NOTES...
