Preventive Maintenance
Swiss Egro 50 Serie
Egro Coffee Systems AG
CH-5443 Niederrohrdorf
15.05.09
Page 4
Adjust the maximum cycles: By entering the maximum number of brewing cycles the service counter is
activated. The input of the value 15 corresponds with 15'000 brewing cycles.
With reaching of this 15'000 brewing cycles the display shows the message "PM Service Req." and the
customer has to inform the service organization.
The number of brewing cycles has to be adapted depending upon application and environment of the
coffee machine.
Reset the brewing cycles: After preventive maintenance was accomplished, the cycle counter will be
reset to zero and activated again.
Choose menu „Service“
Press enter
Choose „Max. Cycles“
Press enter
Enter the value 15 for
15’000 cycles
Pin ....
Enter Pin 1849
Display shows
„Product Total..“
Press enter
Turn key back
Press Enter.
Choose „CLR P.Serv”
Press Enter.
Pin ....
Enter Pin 1849
Display shows
„Product Total..“
Press Enter.
Choose menu „Service“
„CLR P Serv?“
„P Serv. Cleared”
Turn Key back
