+ErgoCan EC1119 Installation Download

Page: 2 / 4

Install brackets on to riser

Use short brackets

No brackets added

1. Slide the bracket over the riser holes

2. Snap brackets onto holes

3. Insert fasteners into holes

EC1119 -

Long Side

STEP 1

EC1818

EC1119 -

Short Side

EC2626

Use long brackets

8 Fastners

GAP

BRACKET

NO GAP

BRACKET

PAGE

Summary of Contents for EC1119

Page 1: ...818 EC2626 SIGNBOARD INSTALLATION Utility Knife Required Short Bracket Riser Sign Board Frame 11 Fastners 11 Fastners 11 Fastners Short Bracket Riser Sign Board Frame Long Bracket Riser Sign Board Fra...

Page 2: ...brackets added 1 Slide the bracket over the riser holes 2 Snap brackets onto holes 3 Insert fasteners into holes EC1119 Long Side STEP 1 EC1818 EC1119 Short Side EC2626 Use long brackets 8 Fastners 8...

Page 3: ...2 Cut panel with utility knife along the line 1 Slide cut panel into tracks 2 Slide riser brackets into tracks note apply even pressure so riser slides in straight even 1 Remove Lid 2 Remove Panel CU...

Page 4: ...ame through open end of frame Attach the signboard frame by inserting signboard frame onto riser tabs shown by arrows through the slots on the signboard frame Push frame down into the narrow part of t...