7
3.
Assembly the actuators piston rod to the
lifting arm. Use the Allen key and the
spanner to tighten the bolt/nut. (Fig.
1.6D). Put the cap on the nut.
Fig. 1.6D
4.
Assembly the handles on the mast with
two screws and tighten with the Allen
key. (Fig 1.6E)
Fig. 1.6E
5.
The hand control, lifting arm and
electrical leg spreader are connected to
the control box. (Fig 1.6F) See section
2.1 – functions / connection.
Fig. 1.6F
Summary of Contents for Solar/185
Page 2: ...2...
