10
ergoselect 1
ergoselect 1
11
4 Preparing the Patient
To adjust the saddle height, open the rotary lever
1
by
turning it counter‑clockwise.
Adjust the appropriate saddle height. Ask the patient to
stand next to the saddle. Position the saddle at the level
of the patient's hip. Then tighten the rotary lever
1
hand
tight by turning it clockwise.
Figure 4 – 3: Tightening the rotary lever
Warning
Do not choose saddle height settings above the
"max." mark.
Do not exceed the maximum height marked on
the scale to avoid any risk of falling!
max.
Before allowing the patient to sit down on the saddle,
check the secure fixation of the saddle as follows:
Danger
With the ergometer standing firmly, check that
the saddle is securely clamped by trying to push
it downwards from above. Adjust the clamping
force of the rotary lever if necessary.
