22
ergoselect 1
ergoselect 1
23
6 Operation
6.9.5 Language
The texts can be displayed in different languages.
Select
Language
German
English
Français
Español
Italiano
Figure 6 – 25: Language menu
6.9.6 Software Version
Select this option to view the installed software version.
Software Version
EF 1.0 X 1
MTK: dd.mm.yyyy
Select
Figure 6 – 26: Display of the installed software version
6.9.7 EKG Type
The selected EKG Type determines the communication
method with the ECG recorder, PC‑based ECG system, etc.
To prevent an accidental change of this setting, the menu
is protected with a password.
Enter the service code "003" and confirm with
Select
.
Select
ECG Type
Service Code
003
Figure 6 – 27: Entering the EKG Type password
The ergometer supports the following communication mode:
•
Digital
There is only one option: "Digital". This option is set by default.
The communication with the ergometer is entirely
controlled with digital commands.
The communication mode is selected and confirmed with
Select
.
Note
• The EKG Type needs to be selected only when the
ergometer is connected to an ECG unit. This
config uration setting is part of the installation
procedure.
Select
ECG Type
Digital
Figure 6 – 28: Selecting the ergometer communication mode
