12
ergoselect 1
ergoselect 1
13
5 Setup and Mains Connection
5.3 Transport
For short distances, the ergoselect 1 can be lifted at the saddle
and rolled away on its castors.
To cover greater distances with the ergoselect 1, however, we
recommend the following method:
• Disconnect the power cord from the wall outlet.
• Rotate the handlebar of the ergoselect 1 towards the front
and tighten the clamping lever.
• Stand in front of the ergoselect 1, grasp the handlebar and tilt
the ergometer towards you until it is standing on the
castors only and is balanced.
• It is now possible to transport the ergoselect 1.
• When you have reached the new location, lower the
ergoselect 1 very carefully to protect it from considerable
damage.
Caution
Equipment Damage
Avoid strong vibrations of the ergoselect 1 during
transport.
Figure 5 – 3: Transporting the ergoselect 1
5.4 Setup
Place the ergoselect 1 on a level floor.
The ergoselect 1 must be set up in a secure and stable position;
the two leveling feet at the back make for easy adjustment
to uneven floors. Extend the foot concerned until the ergoselect 1
no longer wobbles.
In case of delicate flooring, it is recommended to place
a mat under the ergometer to protect the flooring from
damage by the feet.
The ergoselect 1 has 2 castors at the front for transport.
Figure 5 – 4: Leveling foot of the ergoselect 1 ergometer
