8 Control Terminal P
ergoselect 4 / 5
35
8 Control Terminal P
8.1 Turning the System On
You turn on the ergometer by pressing the power switch
(toggle switch[ I / 0 ]).
The ergometer runs a self-test. Subsequently, the main
menu displays.
Figure 8 – 1: Control terminal P
Note
• Instruct the patient not to pedal while the
ergometer is being turned on and during the
selftest.
• Apply the blood pressure cuff to the patient AFTER the
ergometer has been turned on and the selftest completed.
• The device can be configured to default to one of the
operating modes.
If this option is selected, the start screen of the selected
operating mode (e.g., Ergometry) will be displayed instead
of the main menu.
With the
key, you can display the main menu.
PC Mode
Ergometry
Manual
Settings
Select
Figure 8 – 2: Main menu
The ergometer software is controlled with 5 keys:
With this key you display the main menu or return
to the previous menu level.
With this key you initiate a blood pressure measure-
ment. A measurement in progress can be aborted with the
same key.
The functions of these three softkeys change
with the displayed menu – the key label describing the
function is shown on the display.
Figure 8 – 3: Keypad P
Summary of Contents for ergoselect 4
Page 1: ...ergoselect 4 5 Ergometer Operator s Manual 201000433000 Version 2021 06 01 Rev 04 English...
Page 2: ......
Page 95: ......
