5 Applied Parts
ergoselect 4 / 5
19
5.1.6 Checking the ECG Signal
After electrode placement, the quality of the acquired ECG
signal can be directly assessed on the display of the control
terminal. If the ECG signal is too weak or shows too many
artifacts, please correct the electrode placement.
0
1/min
0
%
00:00
mm:ss
0
1/min
0
W
mmHG
--/--
ECG
15 mm/mV
50 mm/s
Pump
Figure 5 – 2: Checking the ECG signal
5.2 Blood Pressure
5.2.1 Contraindications
• The BP module is not intended for use in ICUs or ambu-
lances.
• The BP module is not intended for neonates or pregnant
women.
• The BP module may not be used simultaneously with HF
surgical devices.
• The BP module may not be used in MR environments.
5.2.2 Intended Purpose
The ergoline blood pressure module is intended to measure
the systolic and diastolic blood pressure on the upper arm
at rest and during dynamic exercise by a non-invasive,
auscultatory method.
The medical device is intended for use in professional
healthcare institutions for inpatient and outpatient care.
The signal is acquired on the intact skin of adult patients.
Summary of Contents for ergoselect 4
Page 1: ...ergoselect 4 5 Ergometer Operator s Manual 201000433000 Version 2021 06 01 Rev 04 English...
Page 2: ......
Page 95: ......
