Ergolux 90483, Instruction Manual

Spray

1.  Use  it  to  moisture  the  fabrics  on  stubborn  wrinkle  ironing.  Any  temperature  setting  is 
appropriate for using this function. 
2.  Water tank is to be filled. Press the spray button several times to moisture the garment. 
3.   Be careful when using the spray function - stains may appear on the product.

1.  Self - cleaning

It is necessary to regularly clean the iron, depending on the hardness of the water and the intensity 
of use. 
For this: 
•  Pour water into the water tank and set the thermostat to the maximum position; 

Warning: Never pour vinegar or other liquid detergents into the water tank!

•  as soon as the iron heats up and the indicator light turns off while holding the iron over the sink, 
turn the steam regulator to the extreme right position (clean); 
•  return the lever to its original position as soon as the water in the tank has run out; 
•  iron the damp cloth to clean completely the steam holes on the iron soleplate. 

2.  Surface care

•  turn the steam control knob to the OFF        

(left  position, steamless ironing);

•  unplug the iron and allow it to cool down;
•  use soft damp cloth to remove any deposits on the sole plate.

Warning! Never use any abrasive, vinegar or descaling agents to clean the iron. 

3.    Regularly rinse the water tank and pour out the water after cleaning. 

«Steam burst» 

Vertical steaming

1.  Removes stubborn wrinkles. Use MAX temperature setting for steam burst.
2.  When using this function press and release the steam burst button.

1. Removes wrinkles on delicate garments in hanging position, hanging curtains, or other hanging 
fabrics. Holding the iron in the vertical position, press and release the burst of steam button. 

Warning! Do not direct the steam jet at people! 

Maintenance instructions

10