Operation Manual
Version: 12/01
15
er900 PC Operation Manual
Art-Nr: 475.156
Ergometer
Type
er900 PC
4.3
Connectors and Interfaces
4.3.1
Power Connection
1) Make sure that the unit power switch is in
the off position (not depressed).
"
When
using an ergoline utility cart with suction device, connect the unit’s power
plug to one of the white outlets on the utility cart. The ergometer can then be switched
on and off together with the suction device.
4.3.2
Connector for Blood Pressure Cuff
The cuff tube is to be connected
via Luer-Lok to J16 with the measure-
ment head .
The microphone cable is to be
connected via RCA-Jack to J12
2) Connect the unit’s power plug via the sup-
plied mains cable to power outlet with same
voltage as indicated at the indication label
Putting into Operation