background image

1

FLEXCHARGE4-DSK 

SAFETY INSTRUCTIONS

Safety Instructions

Always read the safety instructions carefully.
•  

Do not install near heat sources such as radiators, heat registers    

 

stoves, or other equipment (including amplifiers) that produce heat.

•  

Unplug the unit during lightning storms or when unused for extended

 

periods of time.

•  

To reduce the risk of fire or electric shock, do not expose this unit to  

 

rain or moisture, including any drips or splashes.

•  

Objects filled with liquids such as vases, should never be placed on or

 

near the unit.

•  

Do not open due to risk of electric shock hazard.

•  

The outlet used to power the unit should be easily accessible and

 

located near the equipment.

•  

The unit is for indoor use only.

•  

Please refer to the marking label on the unit for input and output

 

ratings. Do not overload the power supply.

•  

DO NOT USE this product in life support applications where failure of

 

this unit can reasonably be expected to cause the failure of the life

 

support equipment or to significantly affect its safety or effectiveness is

 

not recommended. Do not use this equipment in the presence of a

 

 flammable anesthetic mixture with air, oxygen or nitrous oxide.

•  

Failure to adhere to these instructions effectively voids the warranty.

Summary of Contents for FCH4-DSK










Reviews: