Sana comfort 150 and 250 REHA
Article no.: 2.520064 rev.: b
Page 23 of 24
8.5
Changing a mains fuse
The fuse switch is located in the centre of the mains module. The lid can be prised out of its lock-in posi-
tion with the help of a small screwdriver. It can then be pulled out of the fuse well. Two fuses are located
in the fuse switch. After a continuity check, change the fuses if necessary. Return the fuse switch to the
well and press it into the lock-in position.
Replace fuses only with other fuses of the same type with the same specification: 2 x 1.25 AT for
230 V, or 2 x 2.5 AT for 110 V.
8.6
Disposal information
Devices that are no longer usable can be returned to ergosana for disposal. Alternatively, the device can
be taken to an approved disposal location.
The control panel of the device contains a buffer battery, which must be disposed of separately.
