ERGOTEC ET-210, Instruction Manual And Warranty Information

5

5/6. CHAIR RECLINE AND RESTORE

Keep pressing to comfortably lay flat or to restore the chair to its original position.

1. ON/OFF

The Start/Stop Control Button

Press this button to light up the LCD screen. Press any massage function button to start massage. This 
will initiate the timer function. Press this button again to stop all massage functions, massage chair 
will return to its original position.

2. PAUSE

Press this button once to halt current massage function and countdown timer. During the pause mode,
the pause button will be blinking.
Press this button again to cease the “Pause” function and resume previous massage functions, as well 
as countdown timer.

3. HEAT

Lumbar Heat Function Start/Stop Control Button

Press this button to activate lumbar heat function, press this button again to stop the heat function.
Note: During Auto Program mode, pressing this button can also disable/enable the heat function.

4. TIMER

Time Interval Control Button

When a massage function is activated, the timer is preset at 15 minutes. Every single press on this 
button will change the timer interval in the sequence of "20>25>30>5>10>15>20" minutes.

7. Z-G

Press this button in order to activate the zero gravity position. 

8/9. LEGREST RECLINE AND RESTORE

Angle Adjustment Button for Leg Rest

Keep pressing either button until the legrest reaches your desired position.

10. SPEED-

The Speed- adjustment button works for Kneading, Tapping, Kneading-Tapping, Clapping, and 
Swedish function

Every single press on this button will change the massage speed interval in the sequence of 
“Lv5>Lv4>Lv3>Lv2>Lv1”.