888-SV-22DL-00 rev C
6
8
Riser Lift Adjustment
LCD Tilt Adjustment
11
10
Attach covers.
IMPORTANT
Lift riser to highest position before making
any adjustments to the tension nut!
Decrease Lift
turn toward MINUS sign
Increase Lift
turn toward PLUS sign
9/16"
d
Lift riser to highest position on tower.
e
Turn tension nut up or down as needed.
f
After adjustment, check lift tension by moving riser up and down (as described in step 9b). If
more adjustment is necessary, continue turning nut until the riser lift is satisfactory.
a
Cover cables on riser.
b
Attach tower cover.
c
Attach top of riser cover.
d
Lock riser cover.
d
c
a
b
a
Move the LCD back and forth. If you feel excessive resistance
within the range of motion, or if the LCD does not stay in the
desired position, the titlt tension should be adjusted, (b).
a
b
d
e
Battery Charging Cycle
a
Plug power cord into appropriate wall outlet and verify that the green "100"
light is fl ashing
to indicate battery is charging. Continue to charge until light stops fl ashing and stays lit.
b
Turn power system on by holding down the AC Outlet Power ON"
located on the RUI for 1 - 3 seconds. The Power light, the battery charge
indicator lights and the alarm enabled light will come on.
*
Do Not stretch coiled cord
further than 10 feet (3 meters),
damage to the cord may occur.
12
Charge Battery
FIRST TIME BATTERY CHARGE
To charge the battery for fi rst time and/or
to charge the battery after a period of storage
LCD Tilt Adjustment
To Increase Tension:
Turn adjustment nut
clockwise
several turns - test again and
repeat if necessary.
To Decrease Tension:
Turn adjustment nut
counter
clockwise
several turns - test
again and repeat if necessary.
Summary of Contents for StyleView SV22-92023
Page 14: ...888 SV 22DL 00 rev C 14...
